Bare optical fiber is made of multi-component/borosilicate glass fiber drawn from our original glass materials.
Bare fibre cables can be delivered on rolls or alternatively, it can customise and prefabricate fibre cable lengths tailored to your specific projects.
Item NO.:
CustomizedProduct Origin:
Jiangsu, ChinaMain Material:
Silica fiberApplication:
For Testing Of Different Experiments In Lab;Sauna ceiling star light
|
PRODUCT |
Quartz Fiber Raw Materials |
|
Numerical Aperture |
UVHCS:0.22±0.02 IRHCS:0.27±0.02 |
|
Waveband |
UVHCS:190nm~1200nm IRHCS:350nm~2500nm |
|
Transmission Rate |
≧99.7％/m |
|
Working Temperature
|
-65℃～125℃ |
| Long-term radius of curvature |
300D (D is the outer diameter of clad) |
|
Short-term radius of curvature |
100D (D is the outer diameter of clad) |
Optical Fiber is bending insensitive single-mode fiber combines two attractive features: excellent low macro-bending sensitivity and low water peak level.
OTDR Dummy fiber is designed to be used in conjunction with an OTDR to measure complete link loss of a fiber. They are also known as pulse suppressor cables, launch cords, launch leads, receive cables or fiber rings. An OTDR dummy fiber, which connects the OTDR to the link-under-test, discloses the insertion loss and reflectance of the near-end connection. A fiber ring serves as both a launch cable and a receive cable.
Bare fiber reel delivers a good macro-bending performance in the industry while maintaining compatibility with current optical fibers, equipment,practices and procedures. This full-spectrum single-mode optical fiber reel when subjected to smaller radii bends experiences virtually no signal loss. It is your best assistant in testing project.
Please contact customer service for different specifications of optical fiber.
It would be helpful to have the following information ready for discussion:
Product Pictures
Product Features
Related Products
Our Factory
Nanjing Giant Technology Co., Ltd. professionally makes and markets plastic optical fibers, glass optical fibers, optical fiber lamps, and various green lights & lamps, specializing in universal non-communication optical fibers. Our running mission: technology based and market oriented. Our quality products have been exported to Europe, the USA, Africa and the Middle East.
FAQ
Fiber optic Hanging lighting is a new creative lighting. It's un-replace because of its special design and lighting effect. Super soft solid side glow fiber, used with our LED light source, creating fantastic lighting effect for club, building. It has the characteristics of color changing, energy saving, long life, etc. More size can be customized.
Pool lights is used for edge swimmg pool light and Fibre Optic Pool Lighting is undoubtedly the best lighting solution for in and around pools. Now many car drivers trend to use it decorate their car.
The fibre optic lighting kits are safe for use in wet and humid areas as no heat or electricity is present in the fibre optics or fittings, but the illuminator which contains the electricity, must be located outside the main sauna or steam room. It is suitable for the ceiling lamp of the sauna or spa room.
Can provide the glass fiber, plastic optical fiber, quartz fiber of various materials of the optical interface and optical fiber length and diameter, size beam, suitable for dot and coaxial illumination, high temperature test, etc.
1.Bare fibre is an uninsulated single core made of PMMA (PolyMethylMethAcrylate) that carries cold light from the illuminator with no electricity or heat in the fibre cable. 2.Uninsulated fibre cables are used for pin point lighting in signs or star ceilings due to the main concentration of light delivered to the end of the fibre cable. Without an outer sheath, light is able to emit from its side creating a soft glow when paired with the correct light source or illuminator. 3. Fiber Optic Application:Light curtain;Fiber optic chandelier;Ceiling star;Pool light;DIY.
The starry sky ceiling light uses polyester fiber sound-absorbing board. We provide different starry sky patterns on the fiberboard of your choice, and you can customize your favorite style.
Fiber optic connector, also known as fiber optic patch cord, can connect the two ends of fiber optic precisely with very low insertion loss. NJGIANT can provide different fiber optic cable and connectors for customization. Including simplex, duplex, miniature-double cable. And SC/FC/LC/ST/MU/MT-RJ/E2000 connector. Used in telecommunication networks, active or passive equipment terminals, Gigabit Ethernet, CATV, industrial, medical and military, etc. This product supports custom sizes.
All aluminum alloy belongs to environmental protection shell, heat pipe and internal cooling technology, longer service life. With a 99.9% light transmittance and high-temperature resistance, optical lens can make an ultra HD image. Ideal for indoor business advertising campaign use in disco, clubs, hotel, KTV, pub, bar, banquet, Christmas, Halloween, weddings, family parties etc.
The latest project of Nanjing Giant: Brush tip fiber optic chandelier
Nanjing Giant's innovative design: Wheat light creates a new experience of flowing light and shadow
Giant Technology cordially invites you to participate in the 26th China International Optoelectronic Exposition
IPv6 network supported
