These Light guides can be used when line illumination or one dimensional linear CCD lighting is necessary.
Applications include glass substrate inspection, PCB board inspection and angled IC pin inspection.
Product Origin:
Jiangsu, ChinaMain Material:
PMMA, Glass, Silica Fiber OpticNumerical Aperture:
0.56,0.6,0.64,0.83Application:
Communication, Art, Sensor, Medicine, Probe, Lighting
|
PRODUCT |
GLASS FIBER OPTIC LIGHT GUIDE |
|
Single Diameter |
15μm-55μm |
|
Numerical Aperture |
0.56, 0.6, 0.64, 0.83 |
|
Heat Resistance |
≥500℃ |
|
Transmissivity/m
|
≥56% |
| Fiber Strength | >150kg/mm² |
|
Spectrum Range |
380nm-1300nm |
Please contact customer service for different specifications of optical fiber.
It would be helpful to have the following information ready for discussion:
Product Pictures
Product Features
Related Products
Our Factory
Nanjing Giant Technology Co., Ltd. professionally makes and markets plastic optical fibers, glass optical fibers, optical fiber lamps, and various green lights & lamps, specializing in universal non-communication optical fibers. Our running mission: technology based and market oriented. Our quality products have been exported to Europe, the USA, Africa and the Middle East.
FAQ
The multi tube light guide has thress or more furcates, these light guide are ideal when illuminating an object from many different angles, such as in the case of IC pin inspection. Application for printer color control, exhibition lighting, UV curing, Jewelry Lighting, and other variety of areas.
In addition to our standard straight type light guides, many different options are available such as random sequence, heat resistant, and small diameter types. These light guides are ideal for spot and coaxial illumination.
Use these light guides for applications where lighting from two directions is need like when using a microscope or CCD camera or for pattern recognition. Interlock type tube material allows you to bend the type as needed and fix it in place. SUS flexible type tube material allows you to move the light guide around freely in a small space. Small diameter type light guides with a smaller minimum bend radius are also available.
Various sizes and distributions can be customized. Can provide a wide spectral conductance. A variety of standard interfaces are available to couple LED and Halogen light sources.
Can be autoclaved under high temperature 135°C and high pressure 0.22MPA. Also we can make the light guide rod that can suit your led curing light. Size and color can be customized.
1 Adopt optinum stainless steel material 2 Adopt German fiber optical 3 All endoscopes are full high definition compatible allowing clear, bright and sharp pictures. 4 Autoclavable and steam sterilization compatible 5 Corrosion resistant 6 Tough construct 7 Superb workmanship 8 Compatible with VANHUR, OLYMPUS, STORZ, WOLF, ACMI STRYKER light guide cable.
This Electronic endoscope product is modular structure designed. It is made up of 3 modules: Display module, Hose module and Main control module. Display module: customers can choose 5″(Easy to carry)or 8″(Better for viewing)according to different requirement. Hose module: can be customized by different length & diameter within same type of signal source to match different using & purchasing cost requirements.
The fibre optic lighting kits, including 1pc LED light engine,optional end piece and fiber optic cables. Fibre optic harnesses can be combined with one or several lengths and diameters of optical fibers. Fiber optic lighting kit can be used in home, car, garden, swimming pool, cinema, theater or baby rooms.
IPv6 network supported
